Whirlpool Dishwasher Not Draining Water
Turn off power to Whirlpool dishwasher at breaker
Affiliate Links: Some product links may earn us a commission at no extra cost to you.
Tools Needed
- screwdriver
- pliers
- shop vacuum
- flashlight
Parts & Materials
Available from multiple retailers
Available from multiple retailers
Available from multiple retailers
Available from multiple retailers
ā ļø Safety First
š§ Tools Needed
š¦ Materials
š Step-by-Step Instructions
1. Turn off power to Whirlpool dishwasher at breaker
2. Remove bottom dish rack and access dishwasher floor
3. Check and clean cylindrical filter at bottom of dishwasher
4. Remove standing water with shop vacuum or towels
5. Check garbage disposal connection for clogs
6. Inspect drain hose under sink for kinks or blockages
7. Access drain pump through bottom panel
8. Check drain pump impeller for obstructions
9. Test drain pump motor with multimeter
10. Replace drain pump if motor tests bad
11. Run test cycle to verify proper drainage
š” Pro Tips
ā Common Mistakes to Avoid
š Troubleshooting
Water pooling in bottom of dishwasher
*Cause:* Clogged filter or drain pump
*Fix:* Clean filter thoroughly and check drain pump operation
Gurgling sounds during drain
*Cause:* Partial blockage in drain system
*Fix:* Check garbage disposal and drain hose for clogs
Error code displaying
*Cause:* Drain pump failure or sensor issue
*Fix:* Test drain pump and check for error code meaning
ā Frequently Asked Questions
Q: How often should I clean Whirlpool dishwasher filter
A: Monthly cleaning prevents most drainage issues
Q: Can garbage disposal problems affect dishwasher
A: Yes, always run disposal clear before using dishwasher
ā Checklist
Related Guides
Whirlpool Front Load Washer Door Won't Unlock
Unplug Whirlpool washer and wait 10 minutes for locks to release
Read Guide āWhirlpool Refrigerator Water Dispenser Not Working
Turn off water supply and unplug Whirlpool refrigerator
Read Guide ā